Select language
Artikelnummer 857-411

Isolation amplifier; Current input signal; Current output signal; Supply voltage: 24 VDC; 6 mm module width; 2,50 mm²

Voorraadartikel
Even geduld a.u.b. ...
Catalogusprijs per stuk*
Op aanvraag
Prijs en beschikbaarheid na aanmelding
Uw prijs per stuk*
Op aanvraag
VPE (subVPE): 1 Piece
Uw ingevoerde waarde werd afgerond.
Niet bestelbaar in UVPE!
Het artikel werd uit de winkelwagen verwijderd, aangezien het zich al in de winkelwagen bevond, of in de max. hoeveelheid werd aangekocht.
Invalid input
1

Short description:

This pre-configured signal conditioner converts, amplifies, filters and electrically isolates analog standard signals.

Features:

  • Input/output: current or voltage signal
  • Safe 3-way isolation with 2.5 kV test voltage per EN 61140

Note:
Die Anschlüsse 3 (Us+) und 7 (Us+) sowie 4 (GND 3) und 8 (GND 3) sind intern gebrückt.
Stromtragfähigkeit zwischen Anschluss 3/4 und 7/8 max: 1 A

Productdetails

Details
Technical Data
Configuration
Configuration options pre-configured
Input
Input signal type Current
Input signal (current) 0 … 20 mA; 4 … 20 mA
Input resistance (current input) ≤ 50 Ω
Input current (max.) 50 mA
Output – Analog
Output signal type Current
Output signal (current) 0 … 20 mA; 4 … 20 mA
Load impedance (current output) ≤ 600 Ω
Signal processing
Limit frequency 100 Hz
Step response (typ.) 3.5 ms
Measurement error
Transmission error (typ.) ≤ 0.1 % of upper-range value
Temperature coefficient ≤ 0.01 %/K
Supply
Power supply type 24 VDC
Nominal supply voltage US DC 24 V
Supply voltage range ±30 %
Power consumption at nominal supply voltage ≤ 25 mA
Safety and protection
Test voltage (input/output/supply) AC 2.5 kV; 50 Hz; 1 min
Protection type IP20
Test voltage
Test voltage (input/output/supply) AC 2.5 kV; 50 Hz; 1 min
Connection data
Connection technology Push-in CAGE CLAMP®
Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch
Physical data
Width 6 mm / 0.236 inch
Height from upper-edge of DIN-rail 97.8 mm / 3.85 inch
Depth 94 mm / 3.701 inch
Mechanical data
Mounting type DIN-35 rail
Material Data
Fire load 0,585 MJ
Weight 36,1 g
Environmental Requirements
Surrounding air temperature (operation) -25 … 70 °C
Surrounding air temperature (storage) -40 … 85 °C
Standards and specifications
Conformity marking CE
EMC immunity to interference EN 61000-6-2
EMC emission of interference EN 61000-6-4
Commercial data
Product Group 6 (Interface Electronics)
Packaging type bag
Country of origin DE
GTIN 4045454471224
Customs tariff number 85437090300
Vergunningen / certificaten
Ex-Approvals
Vergunning
Norm
Certificaatsnaam
Taal
Vergunning: IECEx
TUEV Nord Cert GmbH
Norm IEC 60079-0
Certificaatsnaam: IECEX_TUN_14.0030_X
Vergunning: IECEx
TUEV Nord Cert GmbH
Norm EN 60079-0
Certificaatsnaam: TÜV_14_ATEX_112692_X
Vergunning: UL
UL International Germany GmbH (HAZARDOUS LOCATIONS)
Norm ANSI/ISA 12.12.01
Certificaatsnaam: E198726 Sec.4
Ship Approvals
Vergunning
Norm
Certificaatsnaam
Taal
Vergunning: BV
Bureau Veritas S.A.
Norm -
Certificaatsnaam: 40179_A0
Vergunning: DNV GL
Det Norske Veritas, Germanischer Lloyd
Norm -
Certificaatsnaam: TAA00001D1
Vergunning: NK
Nippon Kaiji Kyokai
Norm -
Certificaatsnaam: TA17255M
Vergunning: PRS
Polski Rejestr Statków
Norm -
Certificaatsnaam: TE/2186/880590/18
UL-Approvals
Vergunning
Norm
Certificaatsnaam
Taal
Vergunning: UL
UL International Netherlands B.V. (ORDINARY LOCATIONS)
Norm UL 508
Certificaatsnaam: E175199 Sec.4
Relevante producten
Gebruiksinstructies
1 Image
Commoning

Commoning, not discrete wiring – same outline allows the use of a single in-line, push-in jumper

Meer lezen...