WAGO
Short description:
The pre-configured isolation amplifier converts, amplifies, filters and electrically isolates standard analog signals.
Features:| Configuration options | permanently configured |
| Input signal type | Voltage |
| Input signal voltage | 0 … 10 V |
| Input resistance (input/voltage) | ≥ 100 kΩ |
| Max. input voltage | 30 V |
| Output signal type | Current |
| Output signal current | 4 … 20 mA |
| Load impedance (output/current) | ≤ 600 Ω |
| Max. operating frequency | 100 Hz |
| Step response typ. | 3.5 ms |
| Transmission error typ. | ≤ 0.1 % of upper range value |
| Temperature coefficient | ≤ 0.01 %/K |
| Type of power supply | 24 VDC |
| Nominal supply voltage US | DC 24 V |
| Supply voltage range | ±30 % |
| Current consumption at supply voltage | ≤ 25 mA |
| Test voltage (input/output/supply) | AC 2.5 kV; 50 Hz; 1 min |
| Protection class | IP20 |
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
| Width | 6 mm / 0.236 inch |
| Height from upper-edge of DIN-35 rail | 97.8 mm / 3.85 inch |
| Depth | 94 mm / 3.701 inch |
| Type of mounting | DIN-35 rail |
| Fire load | 0,405 MJ |
| Weight | 35,5 g |
| Surrounding air (operating) temperature | -25 … 70 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Conformity marking | CE |
| EMC immunity to interference | EN 61000-6-2 |
| EMC emission of interference | EN 61000-6-4 |
| Product Group | 6 (Interface Electronics) |
| Packaging type | bag |
| Country of origin | DE |
| GTIN | 4045454609863 |
| Customs Tariff No. | 85437090300 |
Commoning, not discrete wiring – same outline allows the use of a single in-line, push-in jumper
