Contact
PRODUCTSSOLUTIONSTRENDSCAREERSCOMPANYCUSTOMER SERVICEDOWNLOADSBLOG
Item no. 289-176

Interface module; RJ-45; with power jumper contacts; RJ-45; Cat. 5; in mounting carrier

1 of 2
200_0200001e00030198000200b6_DE200_0200000300007bb8000200b6_DE
120_0200001e00030198000200b6_DE120_0200000300007bb8000200b6_DE
Item no. 289-176
Interface module; RJ-45; with power jumper contacts; RJ-45; Cat. 5; in mounting carrier
Regular in stock
Login
Retail purchase
Item no. 289-176
Interface module; RJ-45; with power jumper contacts; RJ-45; Cat. 5; in mounting carrier
Regular in stock
Login
Retail purchase
Details
Downloads
Related products
Service
Electrical data
Safety and protection
Connection data
Physical data
Mechanical data
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 12
Item no.: 2002-410/000-005
Jumper; 10-way; insulated; red
Item no.: 2002-410/000-006
Jumper; 10-way; insulated; blue
Item no.: 788-312
Relay module; Nominal input voltage: 24 VDC; 2 changeover contacts; Limiting continuous current: 8 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray
Item no.: 2002-1407
4-conductor ground terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; green-yellow
Item no.: 2002-1711
3-conductor fuse terminal block; with pivoting fuse holder; and end plate; for 5 x 20 mm miniature metric fuse; without blown fuse indication; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²; gray
Item no.: 2002-3201
Triple-deck terminal block; Through/through/through terminal block; L/L/L; without marker carrier; suitable for Ex e II applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²; gray
Item no.: 2016-1201
2-conductor through terminal block; 16 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; gray
Item no.: 2016-1207
2-conductor ground terminal block; 16 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; green-yellow
Item no.: 2016-1292
End and intermediate plate; 1 mm thick; orange
Item no.: 289-178
Interface module; RJ-45; with power jumper contacts; PCB terminal blocks; Cat. 5; in mounting carrier; with shield connection; with shield clamping saddle; 1,50 mm²
Item no.: 750-430
8-channel digital input; 24 VDC; 3 ms
Item no.: 750-483
2-channel analog input; 0 ... 30 VDC; Differential input