Elementnr. 2857-401

Isolation amplifier; Bipolar current and voltage input signal; Bipolar strøm- og spenningsutgangssignal; Digital output; Forsyningsspenning: 24 VDC; 12,5 mm modulbredde

Varenummer
Vennligst vent ...
Listepris per del*
Etter anmodning
Priser og tilgjengelighet etter Logg på
Din pris per enhet*
Etter anmodning
PU (SPU): 1 Piece
Verdien du skrev inn ble avrundet.
Ikke tilgjengelig for bestilling under SPU!
Elementet er allerede lagt til og vil ikke bli lagt til igjen. Om nødvendig, juster mengden direkte på artikkelen.
Ugyldig data
1
Short description:

This signal conditioner converts, amplifies, filters, and electrically isolates analog signals.

Features:

  • Analog unipolar/bipolar signals at both input and output
  • Digital signal output reacts to configured measurement range limits (configurable on/off switching delay and threshold value switch function with up to two threshold values).
  • Digital HOLD input freezes the output signal.
  • Clipping capability for analog signal limitation to output end values
  • Adjustable software/hardware filter
  • Input/output response simulation via configuration display
  • Safe 3-way isolation with 4 kV test voltage per EN 61140

Notice:
The device is supplied with 24 VDC, which can be commoned using lateral push-in type jumper bars: (6.1) US+ (BR) and (6.2) GND 2 (BR). With this variant, it is necessary to ensure that the max. permissible total current of 1 A is not exceeded.
Note:

Additional setting options via interface configuration software/app

Produktdetaljer

Detaljer
Technical Data
Configuration
Configuration options DIP switches
Interface configuration software
Interface configuration app
Configuration display
Input
Input signal type Voltage
Current
Input signal voltage ±1 V; 0 … 1 V; ±5 V; 0 … 5 V; 1 … 5 V; ±10 V; 0 … 10 V; 2 … 10 V; ±30 V; 0 … 30 V; ±100 V; 0 … 100 V; ±200 V; 0 … 220 V
Input signal, current ±1 mA; 0 … 1 mA; ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA; ±100 mA; 0 … 100 mA
Input resistance (intput/current) ≤ 50 Ω
Input resistance (input/voltage) ≥ 1 MΩ
Max. input current ± 120 mA
Max. input voltage ±250 V
Input – Digital
HOLD signal 11.8 V … US
Output
Output signal type Voltage
Current
Output signal voltage ± 5 V; 0 … 5 V; 1 … 5 V; ± 10 V; 0 … 10 V
Output signal current ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
Load impedance (output/voltage) ≥ 1 kΩ
Load impedance (output/current) ≤ 600 Ω
Output – Digital
Max. switching voltage (DO) Supply voltage applied: -0.3 V
Max. continuous current (DO) 100 mA (no internal restriction)
Number of switching tresholds (DO) 1 or 2 (adjustable)
Configurable rise/fall delay time (DO) 0 … 60 s (via software)
Signal processing
Max. operating frequency 10 kHz / 5 kHz / 100 Hz / 30 Hz (configurable via DIP switch or software)
Software filter; adjustable moving mean value (filtering level: 30)
Step response typ. 1 ms
Measurement error
Transmission error typ. ≤ 0.1 % of upper range value
Temperature coefficient ≤ 0.01 %/K
Power supply
Type of power supply 24 VDC
Nominal supply voltage US DC 24 V
Supply voltage range ±30 %
Current consumption at supply voltage ≤ 70 mA (+ IDO)
Safety and protection:
Test voltage (input/output/supply) AC 4 kV; 50 Hz; 1 min
Degree of protection IP20
Connection data
Connection technology Push-in CAGE CLAMP®
WAGO terminal picoMAX® 5.0
Solid conductor 0,2 … 2,5 mm² / 24 … 12 AWG
Fine-stranded conductor 0,2 … 2,5 mm² / 24 … 12 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch
Geometrical Data
Width 12,5 mm / 0.492 inch
Høyde fra øverste kant av DIN-skinne 107 mm / 4.213 inch
Depth 110 mm / 4.331 inch
Mechanical data
Type of mounting DIN-35 rail
Material Data
Fire load 1,664 MJ
Weight 85,9 g
Environmental Requirements
Surrounding air (operating) temperature -40 … 70 °C
Surrounding air (storage) temperature -40 … 85 °C
Standards and specifications
Conformity marking CE
EMC immunity to interference EN 61000-6-2; EN 61326-2-3; EN 50121-3-2
EMC emission of interference EN 61000-6-4; EN 61326-2-3; EN 50121-3-2
Standards/specifications EN 60664-1; EN 61373
Commercial data
Product Group 6 (Interface Electronics)
Packaging type bag
Country of origin DE
GTIN 4050821676966
Customs tariff number 85437090300
Kompatible produkter
Installasjonsmerknader
4 Bilder
Configuring

Configuration via DIP switches

Les mer ...
2 Bilder
Conductor termination

Pluggable connection technology

Les mer ...
1 Image
Safety

Lock-out seal option

Les mer ...