Please wait ...
List price per piece
On request
Price and availability after Login
Your price per piece
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1
Item no. 857-409

JUMPFLEX® signal conditioner; bipolar isolation amplifier; configurable

Please wait ...
List price per piece
On request
Price and availability after Login
Your price per piece
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1

Description

Short description:

The bipolar isolation amplifier converts analog, unipolar and bipolar, standard signals. It is also designed to amplify, filter and electrically isolate standard analog signals.

Features:

  • Input overcurrent protection via resettable fuse
  • Zero/span adjustment across the entire measuring range
  • Switching between measuring ranges is calibrated
  • Analog, unipolar and bipolar, standard signals at input/output
  • Switchable max. operating frequency

Safe 3-way isolation with 2.5 kV test voltage per EN 61140

Product details

Details

Technical Data

Configuration
Configuration options DIP switches
Input
Input signal type Voltage
Current
Input signal voltage ±5 V; 0 … 5 V; 1 … 5 V; ±10 V; 0 … 10 V; 2 … 10 V
Input signal, current ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
Input resistance (intput/current) ≤ 50 Ω (approx.)
Input resistance (input/voltage) 1 MΩ (approx.)
Max. input current 50 mA
Max. input voltage 32 V
Zero/span adjustment ± 5 % of the full scale value
Output – Analog
Output signal type Current
Voltage
Output signal voltage ± 5 V; 0 … 5 V; 1 … 5 V; ± 10 V; 0 … 10 V
Output signal current ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
Load impedance (output/voltage) ≥ 2 kΩ
Load impedance (output/current) ≤ 600 Ω
Residual ripple ≤ 10 mV (rms)
Signal processing
Max. operating frequency 100 Hz / 5 kHz (configurable via DIP switch)
Step response typ. 3.5 ms (100 Hz); 60.000000000000005 µs (5 kHz)
Measurement error
Transmission error typ. ≤ 0.1 % of upper range value
Temperature coefficient ≤ 0.01 %/K
Power supply
Type of power supply 24 VDC
Nominal supply voltage US DC 24 V
Supply voltage range ±30 %
Current consumption at supply voltage ≤ 25 mA
Safety and protection:
Test voltage (input/output/supply) AC 2.5 kV; 50 Hz; 1 min
Protection class IP20

Connection data

Connection technology Push-in CAGE CLAMP®
Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch

Geometrical Data

Width 6 mm / 0.236 inch
Height from upper-edge of DIN-35 rail 97.8 mm / 3.85 inch
Depth 94 mm / 3.701 inch

Mechanical data

Type of mounting DIN-35 rail

Material Data

Color light gray
Weight 38.4 g

Environmental Requirements

Surrounding air (operating) temperature -25 … 70 °C
Surrounding air (storage) temperature -40 … 85 °C

Standards and specifications

Conformity marking CE
EMC immunity to interference EN 61000-6-2
EMC emission of interference EN 61000-6-3

Commercial data

Product Group 6 (Interface Electronics)
Packaging type bag
Country of origin DE
GTIN 4045454828493
Customs Tariff No. 85437090300

Approvals / Certificates

Ex-Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: IECEx
TUEV Nord Cert GmbH
Additional Approval Text IEC 60079-0
Certificate name: IECEX_TUN_14.0030_X
Approval: IECEx
TUEV Nord Cert GmbH
Additional Approval Text EN 60079-0
Certificate name: TÜV_14_ATEX_112692_X
Approval: UL
UL International Germany GmbH (HAZARDOUS LOCATIONS)
Additional Approval Text ANSI/ISA 12.12.01
Certificate name: E198726 Sec.4

Ship Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: BV
Bureau Veritas S.A.
Additional Approval Text -
Certificate name: 40179_A0
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Additional Approval Text -
Certificate name: TAA00001D1
Approval: PRS
Polski Rejestr Statków
Additional Approval Text -
Certificate name: TE/2186/880590/18

UL-Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: UL
UL International Netherlands B.V. (ORDINARY LOCATIONS)
Additional Approval Text UL 508
Certificate name: E175199 Sec.4

Downloads

CAD files

CAD data

2D/3D Models 857-409

CAE data

EPLAN Data Portal 857-409
WSCAD Universe 857-409

Compatible products

General accessories

Item no.: 857-979
JUMPFLEX® supply and through module
Signal Conditioners and Isolation Amplifiers > Item no. 857-979

JUMPFLEX® supply and through module

PU (SPU): 25 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
25

Marking accessories

Power supplies

Interface module

Installation Notes

3 pictures
Configuring

Configuration via DIP switches

Read more ...
1 picture
Jumpered

Commoning, not discrete wiring – same outline allows the use of a single in-line, push-in jumper

Read more ...