On this page:

industrial-switches_grafik_funktionsuebersicht-des-industrial-managed-switches_2000x2000.jpg

Industrial Managed Switches: Function Overview

Administration and Diagnostics, Availability, Security, Data Transmission, Performance: All functions of the Industrial Managed Switches at a Glance.

Show product list

Administration and Diagnostics

Simplified Commissioning and Maintenance

industrial-switches_grafik_konfigurationsschnittstellen_2000x1500.jpg

Configuration and Diagnostics

Several Options:

Configuration via Web-Based Management
Configuration via command line (SSH, Telnet, RS-232)
Network management via SNMP v1, v2, v3
Support of MIB standards (Management Information Base)
Diagnostics via Modbus TCP: Numerous information available for easy diagnostics via MODBUS

industrial-switches_grafik_administration-und-diagnosen_ddm_2000x1500.jpg

DDM (Digital Diagnostic Monitoring)

Automatically detects a connected SFP module
Detailed module information
Real-time monitoring
- Temperature
- Power supply
- Transmission power
- Reception power

industrial-switches_grafik_port-mirroring_2000x1500.jpg

Monitoring and Diagnostics

Simplified Maintenance:

Port mirroring: Mirroring the network traffic
LLDP: Automatic detection of adjacent devices
Email notifications

Availability

Via Communication Redundancy

Jet Ring

Typical switching time < 300 ms (depends on the application)
Extremely easy configuration
Up to 20 participants (fast aging) in a jet ring

Xpress Ring and Dual Ring

Xpress Ring:

Switching time < 20 ms
Easy configuration
Up to 200 switches in one Xpress ring
Two Xpress rings per switch

Dual Ring:

Combination of both redundancy types
1 jet ring and 1 Xpress ring per switch or 2 Xpress rings per switch

industrial-switches_grafik_verfuegbarkeit_erps_v2_2000x1500.jpg

ERPS (ETHERNET Ring Protection Switching)

The Fast and Open Solution:

Standardized and open technology
Switching time < 50 ms
Nested topologies with up to six rings per switch
Realization of a one-fault tolerance (SPOF – Single Point of Failure)

ERPS – Enhancement Mode:

WAGO's devices with integrated switch and fast aging configuration
Typical switching time < 300 ms (depends on the application)

Security

Absolutely Secure Industrial Networks

industrial-switches_grafik_sicherheit_iee-802-1x_2000x1500.jpg

IEEE 802.1X Authentication

The Security Standard of IT Networks: Secure authentication and authorization in ETHERNET networks (locally on the switch or via RADIUS server).

Process:

Authentication of a subscriber is done by the authenticator
The authenticator checks the authentication information of the subscriber (supplicant) with an authentication server

industrial-switches_grafik_sicherheit_firewall_2000x1500.jpg

Firewall – Access Control List

Authorization only for the required services

Filtering data packets due to:

a source MAC or source IP address
a destination MAC or destination IP address
a range of MAC or IP addresses
UDP/TCP source or destination ports

Port Security

Dynamically learns MAC addresses per port
Limitation of MAC addresses per port
MAC-based white/black list per port

Data Transmission

Streamlined ETHERNET Networks

industrial-switches_grafik_optimierte-ethernet-netzwerke_logische-trennung-des-netzwerkes_2000x1500.jpg

Logical Network Disconnection

VLAN (e.g., per IEEE 802.1Q)

Segmentation in logical, virtual networks:

Broadcast limitation
Security improvement
Data flow prioritization
Subdivision of machines and office networks, for example

industrial-switches_grafik_optimierte-ethernet-netzwerke_ip-basiertes-vlan_2000x1500.jpg

IP-Based VLAN

Routing of data packets between VLANs via IP address
Communication from one participant to two or more VLANs
Economic connection of networks to higher-level routers
Prioritization of data packets via IP address

industrial-switches_grafik_optimierte_ethernet-netzwerke_mac-basiertes-vlan_2000x1500.jpg

MAC-Based VLAN

Assignment of data packets to a VLAN via MAC address
Prioritization of data packets via MAC address

Performance

Streamlined ETHERNET Networks

Network Optimization

LACP link aggregation

Merge multiple data connections into a single logical link:

Increase transmission rate
Link redundancy

industrial-switches_grafik_performance_qos_2000x1500.jpg

Traffic Prioritization and Limitation

Faster transfer of important data packets through the switch
Prioritization of data packets per IEEE 802.1 Q
Limitation of the bandwidth or number of packets per unit of time per port
Increase in data transmission quality

industrial-switches_grafik_performance_storm-control_2000x1500.jpg

Mastering the Data Traffic

Stopping broadcast storms
Ensuring network availability
Limitating broadcast and multicast data flows (packets/time)

Your WAGO Contact

Product Support

Mon-Thu 8 am - 5 pm CET
Fri 8 am - 4 pm CET

Additional service offerings:

WAGO in der Praxis

Referenzen, in denen Industrial Switches im Einsatz sind

Referenz

Die energieeffiziente Porzellanfabrik

The porcelain manufacturer BHS tabletop AG has invested in a new combined heat and power plant in Schönwald, partially modernized its heat distribution system and installed a central control system with increased operational reliability. This saves the company a lot of energy.