Your Access to WAGO

You are not registered yet?

Register now!
November 22, 2018
News

Measurement – Directly at the Infeed
Current Transformer with a Voltage Tap
for 2-Conductor Through Terminal Block 185 mm2 (350 kcmil)

Ready for compact installations, a new model completes WAGO's series of current transformers with voltage taps. In addition to the 50 mm2 (1/0 AWG) and 95 mm2 (4/0 AWG) versions, a current transformer with voltage tap for WAGO's 185 mm2 (350 kcmil) through terminal block is now also available, making it perfect for measuring energy in small spaces.

November 21, 2018
News

WAGO PCB Terminal Blocks for Power Electronics

WAGO has expanded its line of PCB terminal blocks to help engineers address the trend of electronic miniaturization, which requires that both power and signal levels be integrated onto PCBs. This trend has changed connection technology requirements by increasing power density. leading WAGO to offer its 2606 and 2626 Series PCB Terminal Blocks with 12.5 mm (0.492") pin spacing. Additionally, its 2616 and 2636 Series PCB Terminal Blocks are now available with 15 mm (0.59") pin spacing.

November 19, 2018
News

Compact and High-Performance – WAGO Power Supply with 30 W in Just 35.5 mm

Packing 30 W of performance, WAGO's Compact Power Supply (787-2850) in a DIN-rail-mount enclosure offers a lot of power in a scant 35.5 mm (1.398"). Thanks to the slim design, it saves around 33% more space in the control cabinet and distribution board than standard power supplies.

November 19, 2018
News

New WAGO Compact Power Supplies for 12 VDC Applications and Output Currents from 2.5 to 8 A

Three new devices join WAGO's line of Compact Power Supplies, providing 12 VDC output voltage at 2.5 A (787-1201), 5 A (787-1211) and 8 A (787-1221) output currents. The DIN-rail-mount housing dimensions for these power supplies meet all requirements of DIN 43880. Developed for distribution cabinets, these highly reliable power supplies also meet the electrical safety requirements of EN 60335-1.

October 17, 2018
News

WAGO Field-Side Power Supply Filters and Power Supply Filters with Integrated Ground Diagnostics for Equipment and Systems with Insulation Monitoring

Until now, reliably powering a fieldbus node was the sole function for both WAGO's field-side power supply filters and power supply filters. However, two new variants now offer integrated ground diagnostics as well. And these models go beyond merely protecting the system against high-energy disturbances on DC supply lines, such as those caused by switching overvoltages or inductive loads, and the field supply against transient overvoltages.

October 16, 2018
News

New Features of the WAGO Series 750 Modbus
TCP/UDP Fieldbus Coupler

Re-engineered to offer even greater performance, WAGO has updated its industry-proven Modbus TCP Fieldbus Coupler with a host of new capabilities. However, one thing has stayed the same: Just like the previous 750-352 model, the new 750-362 Coupler reliably connects the comprehensive 750 Series WAGO-I/O-SYSTEM with the widely used Modbus® fieldbus protocol. Connecting a coupler to I/O modules is simple because the coupler detects all of the connected I/O modules and creates a local process image from them. And detection even works flawlessly with a mixed structure of different analog and digital input/output modules.

Are you looking for a contact person at WAGO?
We will be happy to help.

Main office

Mon-Thu 8 am - 5 pm CET, Fri 8 am - 4 pm CET

Additional service offerings: