Anschlussbereich_s_an_ur_0221_0xxx_000_xx_2000x1500.jpg

WAGO'S 221 - flexible, fast and safe to use

Easy to use: Pull the lever up, insert a conductor and push the lever back down – done. The 221 Series Splicing Connectors have always connected solid, stranded and fine-stranded conductors easily, quickly and safely.

But this connector is ready for more.
The Splicing Connector 221 is ideally suited for the following areas of application:

  • in Ex areas
  • in building installations
  • In devices

221-Verbindungsklemmen in unterschiedlichen Einsatzgebieten

221 Series at a Glance

The Unbeatable Benefits of the 221

Lift Lever, Insert Conductor, Close Lever

221 Series Splicing Connector for all conductor types ranging in size from 0.14 to 6 mm2 (26–10 AWG)

  • Connect solid, stranded and fine-stranded conductors
  • Time savings for installers and device manufacturers
  • Quickly install devices with higher levels of power consumption
  • Safely install long cable runs with larger conductor cross sections
Anschlussbereich_2000x1500.jpg
Conductor Range

Two Sizes for All Conductor Types

Quickly and easily connect all conductor types of different cross sections using two-, three-, and five-wire connectors. The new connectors accommodate fine-stranded conductors from 0.14 to 4 mm2 (28–12 AWG), as well as solid and stranded conductors from 0.2 to 4 mm2 (24–12 AWG). With the 6 mm2 (10 AWG) variant, connect all conductor types – with cross sections from 0.5 to 6 mm2 (2−10 AWG).

leichtere_betaetigung_h_ur_0221_0413_002_xx_2000x1500.jpg
Easier Actuation

Extremely Easy to Use

You can open WAGO's Splicing Connectors easily and quickly. Opening the levers on the Series 221 takes very little effort. This means you can connect conductors quickly – and without a single tool! While you are connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector.

pruefoeffnung_221_s_an_0221_0413_005_xx_2000x1500.jpg
Test Slots

Two Test Slots

With the new 221 Series Splicing Connectors, you can now test the voltage from two different sides – even when installed. The connectors carry two test slots right where the WAGO imprint is shown: one in the conductor entry direction and one on the opposite side. This accessibility provides extremely convenient testing conditions – even after installation within a wide range of applications. All connector variants also provide a secure contact for all standard test probes.

Befestigungsadapter_h_ur_0221_0500_007_xx_2000x1500.jpg
Mounting Carriers

WAGO's 221 Series Conquers Distribution Cabinets

Mounting carriers are available for every 221 Series Splicing Connector – whether it’s the two-, three- or five-wire model. They can be mounted vertically as well as horizontally. Secure the carrier by snapping it onto the DIN-rail, or with screws on smooth surfaces. The flexible mounting clamps simplify both connector insertion and removal. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. A test slot is always accessible, ensuring compliance with VDE standards.

MM-4822_221_new_colored_mounting_carrier_2000x2000.jpg
Befestigungsadapter

Befestigungsadapter der Serie 221 jetzt auch in neuen Farbvarianten

Die neuen Farbvarianten in Dunkelgrau-Gelb und Blau unterstreichen die klare Erkennbarkeit der mit der WAGO 221 komfortabel ausgeführten Verteilungen von Neutral- und PE-Leiter im Schaltschrank. Diese Aufbauten gewährleisten auch eine schnelle und einfache Erweiterung der Neutral- oder PE-Verteilungen mit den 221-Verbindungsklemmen bis zu 6 mm2. Die übersichtliche Installation ermöglicht eine schnellere Fehlersuche und Wartung.

WAGO 221 Series Application Examples

The 221 Series at Work

The 221 Series at Work

  • Wire Distribution Boxes with the WAGO 221 Series Splicing Connector

    00:34

    Share this video

    Share link

  • Wire Internal Lighting with the WAGO 221 Series Splicing Connector

    00:33

    Share this video

    Share link

  • Connect LED Spots with the WAGO 221 Series Splicing Connector

    00:42

    Share this video

    Share link

  • Connect Ceiling Loudspeakers with the WAGO 221 Series Splicing Connector

    Share this video

    Share link

  • Extend Small Distribution Boxes with the WAGO 221 Series Splicing Connector

    Share this video

    Share link

Find out more!

Electrical Interconnection Customer Applications

The 221 Series Splicing Connectors for
Ex Applications

221 Series Products

Order 221 Series

221 Series at a location near you

kundenservice_grosshaendlersuche_2000x1500.jpg

Find a wholesaler now

Sie wollen sich selbst von den Vorteilen der 221-Verbindungsklemme überzeugen? Nutzen Sie unsere Großhändlersuche um in Ihrer Nähe ganz einfach einen Elektrogroßfachhändler zu finden.