제품 번호 857-734

Solid-state relay module; Nominal input voltage: 24 VDC; Output voltage range: 0 … 30 VDC; Limiting continuous current: 8 A; Module width: 6 mm

PU (SPU): 25 (1) Piece
입력하신 값은 반올림///되었습니다.
SPU에서/// 주문할 수 없습니다!
이 제품이 이미 추가되어 있고 다시 추가할 수 없습니다. 수량을 변경하시려면 제품의 수량을 직접 수정하십시오.
유효하지 않은 입력
25

Note:

Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.


Safety information 1:
Adjacent devices are devices of the same design (series) that are arranged next to each other with the same orientation on the mounting rail. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.

제품 상세

상세
Technical Data
Control circuit
Nominal input voltage UN DC 24 V (SELV)
Input voltage range (low level) DC 0 … 4 V
Input voltage range (high level) DC 16.8 … 30 V
Nominal input current at UN 12 mA
Max. power loss Pv max. 0.3 W
Load circuit:
Circuit type 2-conductor termination
Limiting continuous current 8 A; 6 A (UL)
Nominal output voltage DC 24 V (SELV)
Output voltage range DC 1 … 30 V
Max. voltage drop at output ≤ DC 0.8 V
Leakage current at nominal voltage ≤ 1 µA
Min. switching current 10 mA
Turn-on time ≤ 60 µs
Drop-out time ≤ 250 µs
Switching frequency ≤ 500 Hz
Signaling
Status indication LED yellow
Safety and protection:
Rated voltage 300 V
Overvoltage category II
Pollution degree 2
Dielectric strength, control/load circuit (AC, 1 min) 3.51 kVrms
Insulation type (control/load circuit) none
Insulation type (between adjacent devices of the the same type) Double insulation (safe isolation)
Insulation type (to any type of adjacent devices) Basic insulation
Safety information 1 Adjacent devices are devices of the same design (series) that are arranged next to each other with the same orientation on the mounting rail. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.
Degree of protection IP20
Connection data
Connection technology Push-in CAGE CLAMP®
Solid conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch
Geometrical Data
Width 6 mm / 0.236 inch
DIN 레일의 상부로부터의 높이 81 mm / 3.189 inch
Depth 94 mm / 3.701 inch
Mechanical data
Type of mounting DIN-35 rail
Material Data
Fire load 0.149 MJ
Weight 28.8 g
Environmental Requirements
Surrounding air (operating) temperature at UN -25 … 70 °C
Surrounding air (operating) temperature for UL -25 … 60 °C
Surrounding air (storage) temperature -40 … 70 °C
Processing temperature -25 … +50 °C
Relative humidity ≤ 95% (no condensation permissible)
Max. operating altitude 2000 m
Standards and specifications
Standards/specifications EN 61010-2-201; EN 61373; EN 61000-6-2; EN 61000-6-3; EN 50121-3-2; EN 50121-4
Elementary relay
WAGO elementary relay 857-181
Commercial data
Packaging type BOX
Country of origin CN
GTIN 4055143851176
Customs tariff number 85365005000
호환 제품
Installation Notes
1 Image
Conductor termination

Connection of conductor

자세히 보기 ...
1 Image
Commoning

Easy commoning using adjacent jumpers

자세히 보기 ...
1 Image
Marking

Marking using WMB Multi markers

자세히 보기 ...
1 Image
Installation

Operation of the relay ejector

자세히 보기 ...