Please wait ...
List price per piece
On request
Price and availability afterLogin
Your price per piece
On request
PU (SPU): 15 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
15
Item no. 788-384

Relay module with driven contacts; Nominal input voltage: 24 VDC; 2 changeover contacts; Limiting continuous current: 6 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray

Please wait ...
List price per piece
On request
Price and availability afterLogin
Your price per piece
On request
PU (SPU): 15 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
15

Description


Note:

  • Per EN 50205, it is only permitted to use 1 make contact / 1 break contact for safety circuits (11-14 and 22-21 or 12-11 and 21-24).
  • Reinforced insulation between coil and contacts
  • A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
  • To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.

Product details

Details

Technical Data

Control circuit
Nominal input voltage UN DC 24 V
Input voltage range -15 … +10 %
Nominal input current at UN 31 mA
Load circuit:
Number of changeover/switchover contacts 2
Contact material (relay) AgNi
Limiting continuous current 6 A
Max. make current (resistive) (AC) 14 A / 4 s
Max. switching voltage AC 250 V
Max. switching power (resistive) AC 1500 VA; DC see load limit curve
Switching capacity AC-15: 3 A / AC 250 V; DC-13: 3 A / DC 24 V
Recommended minimum load 5 V / 10 mA
Pull-in time (typ.) 10 ms
Drop-out time (typ.) 4 ms
Electrical life (N.O.; resistive load; 23 °C) 100 x 103 switching operations
Mechanical life 10 x 106 switching operations
Max. switching load with load/without load 6 min-1 / 300 min-1
Forced operation Type A
Signaling
Status indication LED red
Safety and protection:
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 3
Dielectric strength, control/load circuit (AC, 1 min) 4 kVrms
Dielectric strength open contact (AC, 1 min) 1.5 kVrms
Dielectric strength, load/load circuit (AC, 1 min) 3 kVrms
Protection class IP20

Connection data

Connection technology Push-in CAGE CLAMP®
Solid conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch

Geometrical Data

Width 15 mm / 0.591 inch
Height from upper-edge of DIN-35 rail 64 mm / 2.52 inch
Depth 86 mm / 3.386 inch

Mechanical data

Type of mounting DIN-35 rail

Material Data

Color gray
Fire load 0.943 MJ
Weight 50.3

Environmental Requirements

Surrounding air (operating) temperature at UN -40 … 70 °C
Surrounding air (storage) temperature -40 … 70 °C
Processing temperature -25 … +50 °C

Standards and specifications

Standards/specifications EN 61010-2-201; EN 61810-1; EN 61373; UL 508

Commercial data

Product Group 6 (Interface Electronics)
Packaging type BOX
Country of origin CN
GTIN 4055143184175
Customs Tariff No. 85364900990

Approvals / Certificates

UL-Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: UL
UL International Netherlands B.V. (ORDINARY LOCATIONS)
Additional Approval Text UL 508
Certificate name: E175199 Sec.6

Downloads

Documentation

Instruction Leaflet

CAD files

CAD data

2D/3D Models 788-384

CAE data

EPLAN Data Portal 788-384
WSCAD Universe 788-384

Compatible products

General accessories

Item no.: 209-145
Group marker carrier
Item no.: 209-184
Protection cover; transparent
Item no.: 249-105
Group marker carrier

Marking accessories

Installation Notes

1 picture
Inserting a conductor


Leiter anschließen

Read more ...
1 picture
Jumpered

Easy commoning using adjacent jumpers

Read more ...
1 picture
Marking

Marking using WMB Multi markers and group marker carriers

Read more ...