The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Please wait ...
List price per piece
On request
Price and availability afterLogin
Your price per piece
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1
Item no. 857-500

JUMPFLEX® signal conditioner; frequency; 0.1 Hz ... 120 kHz; configurable

Please wait ...
List price per piece
On request
Price and availability afterLogin
Your price per piece
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1

Description

Short description:

The Frequency Signal Conditioner detects 0.1 – 120 kHz signals from NAMUR, NPN or PNP sensors and
converts them into standard analog signals.

Features:

  • PC configuration interface
  • Signal acquisition from NAMUR, NPN or PNP sensors
  • Calibrated measurement range switching
  • Safe 3-way isolation with 2.5 kV test voltage per EN 61140

Product details

Details

Technical Data

Configuration
Configuration options DIP switches
Interface configuration software
Interface configuration app
Input
Input signal type Frequency generators
NAMUR sensors
NPN/PNP transistor outputs
Mechanical contact (dry contact)
Input – Sensor type 1
Pulse length 1 ≥ 1µs
Sensor type 1 frequency generator
NPN/PNP transistor outputs with pull-up or pull-down resistor
Frequency measurement range 1 0.1 Hz … 120 kHz
Min. measuring span 1 10 Hz
Signal level 1.5 V; 10 V; 20 V (switchable)
Max. input voltage ± DC 31.2 V
Signal form Any
Coupling AC/DC (adjustable; AC above 10 Hz))
Input resistance 10
Input – Sensor type 2
Short-circuit current ≤ 14mA
Sensor type 2 NAMUR sensor per DIN EN 50227
Frequency measurement range 2 0.1 Hz … 1 kHz
Pulse length 2 ≥ 500 µs
Min. measuring span 2 10 Hz
Sensor supply DC 8.2 V
Signal current (0) ≤ 1.2 mA
Signal current (1) ≥ 2.1 mA
Hysteresis 0.45 mA
Short-circuit monitoring ≥ 4.7 mA
Wire break monitoring ≤ 0.2 mA
Input resistance 2 ≤ 600 Ω
Input – Sensor type 3
Sensor type 3 NPN/PNP transistor output without pull-up or pull-down resistor
mechanical contact (dry contact)
Frequency measurement range 3 0.1 Hz … 20 kHz
Pulse length 3 ≥ 25 µs
Min. measuring span 3 100 Hz
Open-circuit voltage DC 5 V
NPN residual voltage ≤ 1.5 V
PNP switching voltage ≥ 7.5 V (+ residual voltage UCE sat)
Output
Output signal type Current
Voltage
Output signal voltage 0 … 5 V; 1 … 5 V; 0 … 10 V; 2 … 10 V
Output signal current 0 … 10 mA; 2 … 10 mA; 0 … 20 mA; 4 … 20 mA
Load impedance (output/voltage) ≥ 2 kΩ
Load impedance (output/current) ≤ 600 Ω
Signal processing
Conversion time Gate time measurement method (> 400 Hz): < 20 ms; Pulse time measurement method (< 400 Hz): < 200 μs + TCycle duration
Measurement error
Transmission error typ. ≤ 0.1 % of upper range value
Temperature coefficient ≤ 0.01 %/K
Power supply
Type of power supply 24 VDC
Nominal supply voltage US DC 24 V
Supply voltage range ±30 %
Current consumption at supply voltage ≤ 40 mA
Safety and protection:
Test voltage (input/output/supply) AC 2.5 kV; 50 Hz; 1 min
Protection class IP20

Connection data

Connection technology Push-in CAGE CLAMP®
Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch

Geometrical Data

Width 6 mm / 0.236 inch
Height from upper-edge of DIN-35 rail 97.8 mm / 3.85 inch
Depth 94 mm / 3.701 inch

Mechanical data

Type of mounting DIN-35 rail

Material Data

Color light gray
Fire load 0.762 MJ
Weight 36.2 g

Environmental Requirements

Surrounding air (operating) temperature -25 … 70 °C
Surrounding air (storage) temperature -40 … 85 °C

Standards and specifications

Conformity marking CE
EMC immunity to interference EN 61000-6-2
EMC emission of interference EN 61000-6-4

Commercial data

Product Group 6 (Interface Electronics)
Country of origin DE
GTIN 4050821226741

Approvals / Certificates

Ex-Approvals

Approval
Additional Approval Text
Certificate name
Approval: IECEx
TUEV Nord Cert GmbH
Additional Approval Text EN 60079-0
Certificate name: TÜV_14_ATEX_112692_X
Approval: IECEx
TUEV Nord Cert GmbH
Additional Approval Text IEC 60079-0
Certificate name: IECEX_TUN_14.0030_X

Ship Approvals

Approval
Additional Approval Text
Certificate name
Approval: BV
Bureau Veritas S.A.
Additional Approval Text -
Certificate name: 40179_A0
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Additional Approval Text -
Certificate name: TAA00001D1
Approval: PRS
Polski Rejestr Statków
Additional Approval Text -
Certificate name: TE/2186/880590/18

UL-Approvals

Approval
Additional Approval Text
Certificate name
Approval: UL
UL International Netherlands B.V. (ORDINARY LOCATIONS)
Additional Approval Text UL 508
Certificate name: E175199 Sec.4

Compatible products

General accessories

Item no.: 750-921
Bluetooth® Adapter
Item no.: 750-923
Configuration cable; USB connector; Length: 2.5 m
Item no.: 750-923/000-001
Configuration cable; USB connector; Length: 5 m

Marking accessories

Power supplies

Interface module