Item no. 857-815

JUMPFLEX® signal conditioner; temperature; loop-powered RTD; configurable

JUMPFLEX® signal conditioner; temperature; loop-powered RTD; configurable
Please wait ...
PU (SPU): 1 Piece
JUMPFLEX® signal conditioner; temperature; loop-powered RTD; configurable
Please wait ...
PU (SPU): 1 Piece
Details
Description
Downloads
Approval
Related products
Knowledge/FAQ
Buy now
Notes
Technical data
Safety and protection
Connection data
Physical data
Mechanical data
Material data
Environmental requirements
Standards and specifications
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
: 210-658
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; angled; short; multicoloured
: 210-722
Operating tool set with partially insulated shaft; Type 1, blade (2.5 x 0.4) mm; Type 2, blade (3.5 x 0.5) mm; Type 3, blade (5.5 x 0.8) mm
: 211-861
Conductor markers for thread-on mounting; for Smart Printer; 5 x 10.5 mm; white
: 211-862
Conductor markers for thread-on mounting; for Smart Printer; 7 x 10.5 mm; white
: 216-202
Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; gray
: 216-203
Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; red
: 216-204
Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; black
: 216-206
Ferrule; Sleeve for 2.5 mm² / AWG 14; insulated; electro-tin plated; blue
: 221-413
COMPACT splicing connector; 3-conductor; with operating levers; 12 AWG; transparent housing
: 280-308
End and intermediate plate; 2.5 mm thick; gray
: 280-343
End and intermediate plate; 2.5 mm thick; orange
: 280-402
Jumper; insulated; gray
: 280-519
Double-deck terminal block; Through/through terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray/gray
: 280-530
Double-deck terminal block; Through/through terminal block; with additional jumper position on lower level; suitable for Ex i applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; blue/blue
: 280-901
2-conductor through terminal block; 2.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; gray
: 284-907
2-conductor ground terminal block; 10 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 10,00 mm²; green-yellow
: 285-135
POWER CAGE CLAMP feedthrough terminal block; DIN 35 x 15 rail mount; 2-conductor; 2 AWG; 16 mm wide; gray
: 285-195
POWER CAGE CLAMP feedthrough terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; gray
: 706-3340/302-100
System cable; for Schneider Modicon M340; 2 x 16 digital inputs or outputs; Length: 1 m; Conductor cross-section: 0.14 mm²
: 750-430
8-channel digital input; 24 VDC; 3 ms