Installation Terminals Blocks: Save Time and Money

The WAGO 274 Series is an electrical connection system consisting of modular through connectors with levers that can be snapped together. Terminal strips with the required number of poles can be assembled from individual modules or supplied as preassembled multi-pole terminal strips.

Your Benefits:

• Modular 2- and 4-conductor versions

• Preassembled terminal strips available with 2 to 8 poles

• Available as splicing connectors and feed-through terminal blocks

• Accessories for mounting, potential distribution and conductor retention

• Available as application-specific factory-configured terminal strips

• With preinstalled locking pins, lever markings, custom printing, PE contacts and additional accessories

• WAGO spring pressure connection technology for safe, maintenance-free conductor termination

• Push-in CAGE CLAMP® and WAGO lever technology for tool-free, simple and fast termination of all conductor types

When installing ceiling spotlights in confined and difficult-to-access spaces, every step counts. The WAGO Junction Box, size 1, 207 Series, was developed for this purpose. In combination with WAGO's 274 Series Through Connectors and 221 Series Inline Splicing Connectors, it enables fast and organized wiring, even in confined spaces.

Your Benefits:

• Precise fit for 50 mm ceiling cut-outs

• Securely attached cover for greater installation convenience

• Integrated strain relief for safe installation

• Four conductor entries for round and flat cables

• IP30 protection rating for indoor use

WAGO's TOPJOB^® S Installation Rail-Mount Terminal Blocks with Push-in CAGE CLAMP^® reliability have a large range of cross-sections, offering the right terminal block for all building applications. As the demands on buildings constantly increase and change, TOPJOB^® S enables future-proof installation.

Your Benefits:

• Flexible selection of the actuation variant (operating slot, push-button or hybrid)

• Standards-compliant insulation resistance measurement thanks to reliable, convenient N-disconnect variants

• Push-in CAGE CLAMP^®: push-in termination of solid conductors and fine-stranded conductors with ferrules

• Sufficient wiring space thanks to compact design

• Three-line custom labeling via marking strips provides clear organization – even when wired

• Easy advance planning with the Product Finder for Distribution Boards in Buildings

WAGO's lighting connectors are the perfect link between solid and fine-stranded conductors. Thanks to their approval as independent equipment per EN 60998, WAGO's lighting connectors can be used in nearly all household applications and similar building installations where a connection between solid and fine-stranded conductors is required.

Your Benefits:

• Ideally connect solid conductors with fine-stranded conductors

• Simple, tool-free wiring – especially helpful for overhead work

• Support numerous applications, including connecting devices with fine-stranded conductors to fixed installations (e.g., blinds motors)

From intercom system wiring to electrical ovens – connecting different conductor types is quick and easy with WAGO's compact splicing connector (221 Series).

Your Benefits:

• Connect all conductor types without having to first prepare them

• Combine any conductor types and sizes

• Easy-to-use operating lever for tool-free terminations

• High current carrying capacity up to 32 A

• Mounting carrier for use in distribution boxes

• Also for cross-sections up to 6 mm²

Discover new design possibilities for the manufacturers of junction boxes, luminaires and electronic devices.

Your Benefits:

• Easy to use: Pull the lever up, insert a conductor and push the lever back down

• Available as 2-, 3- and 5-wire connectors

• Two variants, many applications:
  - The 221 Series 4 mm² variant accommodates fine-stranded conductors from 0.14 to 4 mm², as well as solid and stranded conductors from 0.2 to 4 mm² (24–12 AWG).
  - The 221 Series 6 mm² variant connects all conductor types ranging from 0.5 to 6 mm² (20–10 AWG).

• Mounting carrier for installation conforming to standards

• Working voltage of 275 V or 440 V

• Custom carriers are possible

• ATEX (Ex 2 II G), / IECEx (Ex eb IIC Gb) Zone 1, 2

• IECEX (Ex eb IIC Gb), American Ex (AEx eb IICGb) / Class 1, Zone 1

Our product line supports a wide cross section range: The 243 Series MICRO PUSH WIRE® Connectors for Junction Boxes are specifically designed for small diameters (e.g., low-voltage installations). The 2273 Series connects solid conductors up to 2.5 mm² (14 AWG), and the 773 Series up to 4/6 mm² 12/10 AWG. With the 2773 Series, conductors up to 4 mm² can be easily repaired or extended.

Your Benefits:

• Compact size

• Fast wiring via easy push-in termination of solid conductors

• Tool-free conductor termination

• Mounting carrier for use in distribution cabinets

• Reusable

• Transparent housing to visually verify proper conductor insertion

Our boxes for interconnection technology offer greater protection and clearer organization for your electrical installations:

• The WAGO Lighting Connection Box with integrated Linect® interface for the WINSTA^® Pluggable Connection System keeps dust and dirt away from the lights.

• The WAGO Gelbox provides easy protection against moisture for the 2273 and 221 Series Splicing Connectors – per IPX8.

• The WAGO Junction Box for 221 Series Splicing Connectors provides clear organization for connection of up to 60 conductors.