This analog input module directly connects resistance thermometers, thermocouples, millivolt sensors, resistors, resistor bridges (strain gauges), potentiometers and PTC thermistors operating in the hazardous environments of Zones 0 and 1. Cold junction compensation for the respective channel is incorporated into the module.
The WAGO I/O System 750 must be installed either in Zone 2 or in a non-hazardous area.
The 24 V supply is derived from the module's power jumper contacts.
The shield directly connects to the DIN-rail.
The parameters are set via the GSD file, e!COCKPIT or WAGO-I/O-CHECK.
Indicators:
Field and system levels are electrically isolated.
A functional galvanic isolation is provided between the channels.
The WAGO I/O System 750 must be installed either in Zone 2 or in a non-hazardous area.
The 24 V supply is derived from the module's power jumper contacts.
The shield directly connects to the DIN-rail.
The parameters are set via the GSD file, e!COCKPIT or WAGO-I/O-CHECK.
Indicators:
- Green LED (availability ON/OFF)
- Red LED (underflow, overflow, measurement range overflow/underflow)
Field and system levels are electrically isolated.
A functional galvanic isolation is provided between the channels.