Your Access to WAGO

You are not registered yet?

Register now!
Please wait ...
Price and availability afterLogin
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1
Item no. 750-597

8-channel analog output; 0 … 10 V/±10 VDC

Please wait ...
Price and availability afterLogin
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1

Description

The analog output module generates signals of a standard magnitude 0–10 V and ±10V.

The output signal is electrically isolated and transmitted with a resolution of 12 bits.

Both the internal system and 24V field side supply power the module.

The output channels of the module have a common ground potential.

The bus module detects a 24 V field supply failure. The status is transmitted to the fieldbus coupler and indicated by an LED.

The module can be configured via WAGO‐I/O‐CHECK or GSD files.

Product details

Details

Technical Data

Number of analog outputs 8
Total number of channels (module) 8
Type of signal Voltage
Type of signal voltage DC 0 … 10 V
Actuator connection 8 x (2-conductor)
Resolution [bit] 12 Bit
Bit width 8 x 16-bit data; 8 x 8-bit control/status (optional)
Load impedance (output/voltage) ≥ 2kΩ
Conversion time (typ. ≤) 13 ms
Messfehler, Bezugstemperatur 25 °C
Messfehler, Abweichung max. vom Messbereichsendwert 0.1 %
Temperature coefficient ≤ ± 10 ppm/K of the largest output area
System supply voltage DC 5 V; via data contacts
Current consumption, system supply (5 V) 61 mA
Field supply voltage DC 24 V (-15 … 30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt)
Isolation 500 V system/field
Number of incoming power jumper contacts 2
Number of outgoing power jumper contacts 2

Connection data

Connection technology: In-/Outputs 16 x Push-in CAGE CLAMP®
Connection type (1) Inputs/Outputs
Solid conductor 0.08 … 1.5 mm² / 28 … 16 AWG
Fine-stranded conductor 0.25 … 1.5 mm² / 22 … 16 AWG
Strip length 8 … 9 mm / 0.31 … 0.35 Inch

Geometrical Data

Width 12 mm / 0.472 inch
Height 69 mm / 2.717 inch
Height from upper-edge of DIN-35 rail 61.8 mm / 2.433 inch
Depth 100 mm / 3.937 inch

Mechanical data

Type of mounting DIN-35 rail

Material Data

Housing material Polycarbonate, polyamide 6.6
Weight 48 g
Conformity marking CE

Environmental Requirements

Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -40 … 85 °C
Protection class IP20
Degree of pollution (5) 2 per IEC 61131-2
Operating altitude 0 … 2000 m
Mounting position horizontal (standing/lying) or vertical
Relative air humidity (no condensation) 95 %
Vibration resistance acc. to IEC 60068-2-6
Shock resistance 15g per IEC 60068-2-27
EMC immunity to interference acc. to EN 61000-6-2
EMC emission of interference acc. to EN 61000-6-3
Exposure to pollutants Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity < 75 % 10 ppm
Permissible SO2 contaminant concentration at a relative humidity < 75 % 25 ppm

Commercial data

Country of origin DE
GTIN 4055143432146
Customs Tariff No. 85389099990

Approvals / Certificates

Country specific Approvals

Approval
Additional Approval Text
Certificate name
Approval: KC
National Radio Research Agency
Additional Approval Text Article 58-2, Clause 3
Certificate name: MSIP-REM-W43-AOM750
English

Downloads

Documentation

Manual

8-channel, 0-10VDC / ±10VDC
May 4, 2016
5.1 MB

Additional Information

Disposal; Electrical and electronic equipment, Packaging
Oct 15, 2018
265.8 kB

System Description

Use in Hazardous Environments Term definition, marking and installation regulations
May 8, 2014
1.0 MB
Design Notes Basic conditions and recommendations for higher operational safety
May 3, 2011
1.5 MB
750/753 Series I/O-System ‒ General Product Information
May 29, 2018
2.0 MB
Overview on WAGO-I/O-SYSTEM 750 approvals
Jun 6, 2017
314.9 kB

Application Notes

Application Note CoDeSys 2.3

Application Note Library ModuleAccess_01 These instructions describe the use of the ModuleAccess_01.lib library using 4 examples.
Jan 29, 2016
1.0 MB

Libraries

Library

ModuleAccess_01.lib The ModuleAccess_01 library provides both module configuration and access to its process data within a CoDeSys project without the use of WAGO I/O Check.
Feb 16, 2018
1.5 MB

CAD/CAE - Smart Data

CAD data

3D Download 750-597
URL

Compatible products

Carrier rail

Marking accessories

Supply module

Shield termination

System housing

Product family

750/753 Series I/O-System