Your Access to WAGO

You are not registered yet?

Register now!
betaetigungsvarianten_topjob-s_keyvisual_2000x1125.jpg

Rail-Mount Terminal Blocks with lever, push-button or open tool slot

WAGO Rail-Mount Through Terminal Blocks are available in three different actuation variants: lever, push-button or open tool slot – the right rail-mount terminal block for every application.

The marking system and the multifunctional range of jumpers for the well-known WAGO TOPJOB® S Rail-Mount Terminal Blocks can also be used for the new rail-mount terminal blocks with levers.

Advantages:

  • Three actuation variants: lever, push-button, open tool slot
  • Continuous marking possibilities
  • Existing range of TOPJOB® S Jumpers for all three models
  • Push-in termination of solid, stranded and ferruled conductors for all variants
  • Test options for all variants

Product Overview

betaetigungsvarianten_topbjob-s_schiene_hebel-lang_2000x1500.jpg

Levers

Connect tool-free via rail-mount terminal blocks with levers. A lever means opening and closing a clamping point by hand doesn’t get any easier. Especially when making connections in the field, the user benefits from the ease of use offered by this intuitive design. The levers remain in open for the simultaneous connection of difficult-to-bend conductors with large cross sections. Thanks to Push-in CAGE CLAMP®, solid and stranded conductors, as well as fine-stranded conductors with gas-tight, crimped ferrules, can also be connected by push-in termination.

Advantages:

  • All conductor types can be disconnected easily and intuitively by hand.
  • All conductor types can be disconnected easily and intuitively by hand.
  • The lever engages and keeps the clamping point open with no exertion, freeing hands for wiringThe lever engages and keeps the clamping point open with no exertion, freeing hands for wiring
  • The lever position clearly signals whether the clamping point is open or closed.
  • Even difficult-to-bend conductors are easily connected through the side conductor entry.

betaetigungsvarianten_topjob-s_schiene_druecker-lang_2000x1500.jpg

Push-Buttons

The TOPJOB® S Rail-Mount Terminal Block line also includes push-button variants. The rail-mount terminal blocks with push-buttons are offered in nominal cross-sections of 18, 16, 14, 12, 10, 8 and 6 AWG. They are available as two-, three- or even four-conductor variants. The clamping point is opened by actuating the push-button with any common tool. The orange push-button allows the actuator to be clearly and quickly distinguished from the conductor entry. The Push-in CAGE CLAMP® forms the heart of the TOPJOB® S Rail-Mount Terminal Blocks. It offers the additional possibility of connecting solid and stranded conductors, as well as fine-stranded conductors with gas-tight, crimped ferrules, by simply pushing them in – no tools needed.

Advantages

  • Use any common tool to open the clamping point via the push-button
  • Intuitive operation – the orange color highlights the push-button.

betaetigungsvarianten_topjob-s_schiene_betaetigungsoeffnung-lang_2000x1500.jpg

Open Tool Slot

The TOPJOB® S Rail-Mount Terminal Blocks with Open Tool Slots enable easy connection with an operating tool. The operating tool, which is used for connecting fine-stranded conductors, remains in the open tool slot until termination is complete. The clamping point is held open, keeping hands free for wiring. The rail-mount terminal blocks with open tool slots feature a wide and flexible product range. In addition to single-deck terminal blocks with a large cross-section range of 24–4 AWG, double- and triple-deck terminal blocks, along with function blocks, are also available for any type of application.

Advantages:

  • The operating tool remains in the open tool slot until termination is complete.
  • The clamping point is marked by the inserted operating tool.
  • The conductor entry is held open, keeping hands free for wiring.

Push-in connection technology

Push-in CAGE CLAMP® is the universal connection technology for all conductor types. For especially quick conductor connection, all three actuation versions offer the possibility of connecting solid and stranded conductors, as well as fine-stranded conductors with gas-tight, crimped ferrules by simply pushing them in – no tools needed.

ImageDescriptionImageDescription
Solid
Conductors ranging from two sizes below the rated cross-section up to the rated cross-section can be simply pushed in.
Stranded
Conductors ranging from two sizes below the rated cross-section up to the rated cross-section can be simply pushed in.
Fine-stranded with ferrule (gastight crimped)
Conductors ranging from two sizes below and up to the rated cross-section can be simply pushed in.
Fine-stranded, tip-bonded
Conductors ranging from two sizes below and up to the rated cross-section can be simply pushed in (depending on the conductor's stiffness and bonding length).
Fine-stranded with pin terminal (gastight crimped)
Conductors ranging from two sizes below and up to the rated cross-section can be simply pushed in (depending on pin diameter).
Fine-stranded, also with tinned single conductors
Entire wire gauge range can be terminated by using a screwdriver to open the clamping unit, inserting the conductor, and then removing the screwdriver.

topjob-s_hebelreihenklemme_session_2000x1500.jpg

One Jumper Line

The TOPJOB® S jumper range is compatible with the entire rail-mount terminal block range, including all three actuation variants. This gives you right solution for all commoning tasks.

Advantages:

  • Solve complex commoning tasks with simplicity!
  • Clearly see all commoning.

Type of CommoningCircuit DiagramApplications
Push-In Type Jumper BarMulti-pole, push-in jumpers (2 to 10 poles) can be easily customized, They can be adapted by simply removing individual contact legs. Factory pre-configured push-in type jumper bar (1 to x) are also available.
Continuous JumperContinuous jumpers provide seemingly endless possibilities. You can simply add another adjacent jumper in the same jumper slot for any additional function or to common a greater number of terminal blocks during commissioning.
Step-Down JumperOur step-down jumpers easily common terminal blocks rated for different conductor sizes, making them ideal for power distribution applications.
Staggered JumperStaggered (slim style) jumpers accommodate different potentials across a single jumper row, offering industry-exclusive commoning of up to four different potentials. Customize jumpers by breaking off individual contact legs.
Vertical JumperVertical jumpers are the perfect solution for multilevel terminal blocks. They easily connect two or three levels.
Push-In Type Wire JumperUsing push-in type wire jumpers, commoning over longer distances, across multiple levels, or around plug-in component accessories is easily achieved. They are available in three different lengths.
Star Point JumpersThis jumper has been specially developed to create a “star point” and is ideal for motor terminal boards.
Delta JumperDelta jumpers are available for delta motor connections .
beschriftung_2000x1500px_1.jpg

Continuous marking possibilities

Since they have the same profiles, all three versions of the TOPJOB® S Rail-Mount Terminal Blocks can be labeled with a continuous marking strip in the shortest time possible. Multi-line strips can be printed with the smartPRINTER, greatly simplifying functional assignment.

Features:

  • Multi-line marking strips for clear, detailed control cabinet labels
  • WMB Inline markers on a reel are suitable for various terminal block sizes.

Actuation variant video

With the expanding TOPJOB® S Rail-Mount Terminal Block range, you can now choose from three actuation variants: lever, push-button or open tool slot. Choose the models that best suit your application.

kundenservice_printmedien_kataloge_2000x1500.jpg

TOPJOB-S® Brochure

Download our latest TOPJOB-S® brochure in PDF format here. Included within are all three terminal block variants: lever, push-button and open tool slot.

Your Shopping Cart

Added to shopping cart.
Go to the shopping cart Request quote Continue shopping.

Are you sure?

Fast Entry

Please enter an exact item number (e.g., 2002-1201) and confirm your entry with the “Enter” key. Use the “Tab” key to navigate between the columns.
Order quantity: Max. {0}
PU (SPU): pcs
Please wait ...
Change Country

You are leaving the currently selected country website and will be logged out. Your user account only applies to one country. Your newly selected country website has other contacts and may have different content and functions.

orderlist with csv import

Import your order list file in the following format:
  • CSV files only
  • [article number] separator [set]
  • One item per line

Add from orderlist

Copy your order list to the text box in the following format:
  • [article number] separator [quantity]
  • One item per line

Copy watchlist

Please enter a unique name for the new watch list. Then all noted products, downloads and pages are copied to the new watch list.