Product details

Details

Electrical data

Operating voltage ≤ AC/DC 250 V
Current consumption at supply voltage 0
Peak reverse voltage 1600 V
Rectified current for each diode, resistive 1 A
Rectified current for each diode 1 A
Forward voltage for each Diode 1.1 V
Forward current (resistent) for each diode 1 A
Leakage current 50 µA

Safety and protection:

Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 2
Protection class IP00*
Note on protection class * Notice!Live conductors! Protection against direct contact must be provided by the equipment builder, e.g., using a WAGO 709 Series cover (see Accessories) or a similar cover. The installation requirements for the particular application must be observed.

Connection data

Connection technology CAGE CLAMP®
WAGO terminal WAGO 236 Series
Solid conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Strip length 5 … 6 mm / 0.2 … 0.24 inch
Note (conductor cross-section) 12 AWG: THHN, THWN

Geometrical Data

Width 69 mm / 2.717 inch
Height from upper-edge of DIN-35 rail 21 mm / 0.827 inch
Depth 50 mm / 1.969 inch

Mechanical data

Type of mounting DIN-35 rail
Housing design PCB with mounting feet

Material Data

Fire load 0.058 MJ
Weight 35.5 g

Environmental Requirements

Surrounding air (operating) temperature -25 … 40 °C

Commercial data

Product Group 6 (Interface Electronics)
Packaging type BOX
Country of origin DE
GTIN 4045454380960
Customs Tariff No. 85369010000

Downloads

Documentation

Instruction Leaflet

CAD/CAE-Data

CAD data

2D/3D Models 289-151

CAE data

EPLAN Data Portal 289-151
WSCAD Universe 289-151

Compatible products

General accessories

Item no.: 288-001
Mounting carrier; gray
Empty Housings > Item no. 288-001

Mounting carrier; gray

PU (SPU): 50 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
50
Item no.: 288-002
Universal mounting foot; snap-fit type; suitable for DIN 15, 35 and 32 rails; gray
Accessories > Item no. 288-002

Universal mounting foot; snap-fit type; suitable for DIN 15, 35 and 32 rails; gray

PU (SPU): 100 (10) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
100

Marking accessories